Regular curtains found at any big-box store cannot be used on a traverse rod. … Curtains for traverse rods are most often a style of curtain called “pinch pleat.” Regular curtains won’t hang right – but you can turn a regular curtain into a pinch pleat curtain, and further, into a traverse curtain.
Can you put any curtains on a traverse rod?
Regular curtains found at any big-box store cannot be used on a traverse rod. … Curtains for traverse rods are most often a style of curtain called “pinch pleat.” Regular curtains won’t hang right – but you can turn a regular curtain into a pinch pleat curtain, and further, into a traverse curtain.
What is a standard traverse rod?
What are traverse curtain rods? Traverse curtain rods are a mechanized track system product that allows the user to open or close their curtains with a pull of a string.
What is a traverse rod carrier?
Traverse rods consist of a pulley system that allows you to draw and close your drapes or curtains with a simple pull of a string. … Over time, these plastic carriers age and become brittle and break, leaving you with a drooping curtain or drape.Who makes traverse curtain rods?
Kirsch Decorative Traverse Curtain Rods are as functional as they are beautiful. Kirsch offers the Estate Traverse Rod Collection in Wood and Metal, in both 1 3/8 inch and 2 inch options.
What is Pleater tape?
Best Pleat Pleater Tape is 4 inches wide and used in drapery headings to make creating pleats easy. Use with traverse pleater hooks to make triple pinch pleated curtains. Sew the tape to the back of the heading and side the ends of the hooks into the pockets on the tape to make perfect pleats.
How do you cover a traverse rod?
Use brackets and cornice: Any horizontal decorating molding called cornice is a great way to cover a curtain rod. It completely crowns the curtain rod and is considered the best covering for a curtain rod. Usually, brackets are installed on a cornice and then a curtain rod is used inside.
How are traverse rods measured?
Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.How do you put a glider on a curtain track?
A good way of spacing your gliders and ensuring you have enough prior to adding them to your curtain track is to lay your curtains on the floor or any flat surface. You can then place the gliders just above the curtains allowing you to space them out evenly and count the number of gliders needed along your track.
Can I hang rod pocket curtains on a traverse rod?The traverse rod provides drawstrings for opening and closing the curtains. Although the traverse rod system was made for pinch pleat curtains, you can adapt almost any rod pocket curtain to work on the rods.
Article first time published onHow do you use Pleater tape on a hook?
Lay the pleater tape on the back of the top, fold under the ends, and pin. Make sure the pockets are on the bottom of the tape and facing out. Take note of the different color threads and sew around the edges of the tape on those lines. Take a hook and insert the ends of the prongs into the pockets.
What is eyelet curtains?
Eyelet curtains, or ring top curtains, are contemporary headings that uses poles for mounting. The rings on the headings give out even soft pleats for your window treatments, unlike the usual ones that use a header tape. This means they do not need much material in the same way as a taped heading would.
Who makes swish curtain track?
Now part of Hunter Douglas group (Sunflex), the Swish brand is trusted all over the world and produces affordable and quality ready to fit curtain poles, tracks blinds and accessories for all types of windows.
How many curtain gliders do I need?
If you calculate how many rings you will need on this basis you should never be short of rings when you buy your new curtain pole again! If you have a curtain track rather than a curtain pole, the guideline for the amount of gliders/hooks required is still 4 per 30cm.
How do you attach pencil pleat curtains to a track?
– Along the track: place the hooks at 4′ intervals The curtain or voile curtain is ready to be hung. Thanks to these fixtures, you can adapt your pencil pleat curtains to a track: position them along the top of the curtain at intervals of around 6′ and tighten the screws firmly. Slide the rings onto the track.
How much bigger should a curtain rod be?
A good rule of thumb is to have the curtain rod extend three to four inches from each side of the window frame.
What size traverse rod do I need?
Use the largest of the three as your window’s width. If you don’t have much space to either side of your window, look for a curtain rod that is the same width as your window. However, if space permits, we recommend that your curtain rod extend five inches past your window on either side.
How much wider Should a curtain rod be?
Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.
What hooks to use for pencil pleat curtains?
Hanging Curtains On A Rod Pencil pleat or pinch pleat curtains use hooks or rings to attach the curtain to the rod (32mm gather hooks are suitable for rod sets with rings).
What is header tape?
Header tape is a stiff fabric band sewn on the back of the fabric along the top of the curtain panel. The tape is gathered into pleats evenly across the panel; it’s made with pleat pockets already in place so the gathering task is quick and precise.
